Skip to main content

Create from Felt the Territorial Flower of the Northwest Territories : Mountain Avens

 

Eightpetal Mountain Avens is the territorial flower of the N.W.T. as well as the national flower of Iceland. This flower rotates with the sun, and combined with it's fuzzy leaves and red stalk, makes for a striking colour combination. 




Supplies:
  • wire 
  • red, white, green and yellow felt 
  • glue gun glue

Tools
  • -scissors
  • -wire cutter
  • -pilers 
  • -glue gun
  • -paint brush
1) cut out felt pieces and a 13cm piece of wire.









2) Prep by applying a coat of mod podge to the stamin piece of felt. Allow to dry.








3) Assemble the pistil. Apply a dollop of glue to the center of the circular pistil piece, place one end of the wire in to the center of the glue, and wrap the felt down the sides of the wire. 









4) Make cuts along one side of the now dry felt stamin.









5) Attach stamin to base of the pistil by securing one end of the stamin base to the base of the pistil and rolling the felt stamin (securing with glue as needed) around.









6) Attach petals to the base of the stamin.









7) Wrap wire stem with red felt strips, securing with glue as needed.









8) Cut leave pieces in half vertically. Glue wire to one side. Then glue other felt side over top the wire









9) Attach the base of the leaves to the base of the stem by twisting the wires together.









10) Finish up by covering the remaining wire with red felt.









11) bend the wire to create a natural shape that stands up. you are now complete!




Labels:

Comments

Post a Comment

Popular posts from this blog

DIY Fly Swatter

  This is my second fly swatter I have created - they really do work! These are based loosely on the cute fly shaped fly swatters from Ameico Inc . Before I get in to my process, please note that this requires a sharp xacto blade.  Please only attempt if you are an adult, and please be careful! Supplies: leather leather lacing 4 small buttons wooden dowel contact cement or similar glue for leather mod podge upholstery thread (or heavy duty thread) patten for front and back of swatter - one side is the body and wings, the other side is just the body (wings will be only one layer thick) Tools: paint brush needle leather punch with different sized holes scissors xacto blade  clips to hold your pattern in place q-tip for spreading contact cement lighter to singe the ends of the upholstery thread 1) using a pattern, cut out your leather pieces, use the leather punch to punch out sewing holes around the body, as well as holes on the wings. 2) using the xacto knife, shave off ex...
Post a Comment
Read more

DIY Bumble Bee Finger Puppet

  Let me show you how I make a simple, but realistic looking bumble bee finger puppet! Supplies: black embroidery thread/ floss felt in yellow, white and black net or mesh like fabric for wings (something semi transparent) mod podge or similar paint brush for the mod podge wax paper or a surface the mod podge won't stick to glue gun scissors 1) cut out the shapes. 2) cut a piece of the embroidery floss around 25cm in length and make knots every 3 cm 3)  stretch it taut on to the wax paper  apply mod podge to the floss  4) when the mod podge is dry, cut the floss just 3mm past each knot 5) take the main body and apply mod podge to the leg areas and the head area. Place floss legs and antenna as desired. place the little triangle felt pieces over the legs and the oval felt piece over the head area  6) once the felt pieces and floss are sandwiched together, fold over the wax paper and place under a weighted book. Allow to dry 7) if you could not tell, the piece of ...
Post a Comment
Read more

DIY Mushroom Candles

  I love the mushroom candles on the market, but I find them expensive. I had some straight pillar candles from the dollar store which I carved into small, birthday sized candles. I carved 2-3 small mushroom candles from each regular candle. Each candle took around 15 minuets to carve. Before I get into how I carved them, I have 2 notes of caution: this will get messy, have some newspaper handy to work on top of SAFETY FIRST: this is an adult craft, use caution with blades Supplies: straight taper candle wax in desired colours (old birthday candles, natural beeswax) acrylic paint (optional) Tools: a VERY DULL BLADE (I used an old army knife a bought from the dollar store years ago) heat proof container (I used an old votive candle holder) pot of hot water to melt wax in popsicle sticks 1) with your blade, mark out a line (going all the way around the candle) the total approximate size you want your mushroom candle to be 2) snap the candle so it breaks along the line you made, slice...
Post a Comment
Read more